三維混合機

一、工作原理及應用范圍介紹 Introduction of Working Principle and Scope of Application

該機在運動中由于混合桶具有X、Y、Z空間多個方向運轉動作，使各種物料在混合過程中加速了流動和擴散作用，同時還避免了一般混料機因離心力作用所產生的物料比重偏析與積聚現象?；旌?，能有效確保混合物料的品質。

本機廣泛運用于制藥、化工、食品、冶金、輕工及科研單位等。

     The mixing drum operates on several directions in the X, Y and Z spaces to accelerate the flow and diffusion of various materials during the mixing and avoid specific gravity segregation and accumulation of material due to centrifugal force. The full mixing can ensure the best quality of mixed materials.

     This equipment is widely applied in the pharmacy, chemical, food, metallurgy, light industry and research institutions.

二、特點Characteristics

1. 由于系多向運動，混料桶內物料交叉混合點多，混合效率高，均勻度可達99.9％以上。

2.  比傳統混料機生產效率高，裝載系數*可達0.9，而傳統混料機為0.4-0.6。

3.  設備結構巧妙且緊湊，運行采用無極變速，以滿足不同物料的工藝要求。

4.  出料干凈，清洗方便。

1. As multi-direction movement, the materials in the mixing drum are crossed and mixed with high mixing efficiency and uniformity over 99.9%.

2. It has high production efficiency than traditional mixers; the load factor is up to 0.9, while that of the traditional mixer is 0.4-0.6.

3.The equipment is ingenious and compact in structure withcontinuously variable transmission adopted and meets the process requirements of various materials.

4. It is clean in discharge and convenient for clean.

三、外形簡圖Dimension sketch

四、技術參數（下表中數值僅供選型時參考）

Technical parameters (the values in the table below are for reference in type selection only)