228 AC/DC泄漏電流測試表
Simpson228測試對于與危險的泄漏電流，設計符合的UL、IEC和ANSI規(guī)格。228查出當前AC和DC漏出并且模仿人的反應在三個不同水平-- 反應，放棄，以及燒傷危險。每個Simpson228具有彈簧夾、指南和電池以及測試筆。
- 查出危險AC & DC 泄漏電流在電子或電子設備導電性表面
- 設計遇見新的IEC、ANSI和UL指南
- 反應，放棄和無重負的燒傷危險網絡測量
- 電池操作為zui大輕便
Opecifications
GENERAL
Reaction
ResponseNetworkLet-Go
ResponseNetworkUnweightedBurnHazard
Response NetworkEquivalent network component values:Complies with values specified in IEC 990 （excluding fuse）Equivalent measuring instrument load:1 MΩ- 10pF1 MΩ- 62 pF1 MΩ- 1 pFRanges:0.3, 1, 3, 10 M.I.U.0.3, 1, 3, 10 M.I.U.0-100 mA RMSCurrent accuracy:±2% F.S. @ 60 HzMeter measurement method:True RMSMeter frequency response:（Relative to ANSI C101-1992 or UL-1459 2nd edition）DC to 1 HzPointer shall track within 5% of peak2Hz to 19Hz （Accuracy not supported）20 Hz to 200 KHz±2% F.S.±2.5% of F.S.±2% F.S.200 KHz to 1 MHz±2% F.S.±2.5% F.S.±5% F.S.Output sensitivity:Full scale meter indication equals 1V RMS （Measured with a 1 MΩ- 12 pF load）Output accuracy:±2% of reading @ 60 HzOutput frequency response:（Relative to ANSI C101-1992 or UL-1459 2nd edition）DC to 50Hz±2% of reading50 Hz to 100 KHz±2.5% of reading±2% /-3% of reading±2% of reading100 kHz to 1 MHz±5% of readingVoltmeter range:0-300 V （AC or DC）Voltmeter accuracy: DC to 1 HzPointer shall track within 5% of peak2Hz to 19Hz （Accuracy not supported）20 Hz to 1KHz±3% F.S. @ 60 Hz （Add ±1% for every additional 100Hz）Voltmeter frequency response:DC to 1 KHzPower requirements:Power requirements: （2） 9V （NEDA 1604A） batteriesPhysical:7" x 5.25" x 3.125", 2-1/2 lbs （1.4kg）, ABS plastic,fusedinputEnvironmental:27°C ±2° C, 70% non condensing relative humidity. Outside thisrangederate by 10% per °CMaximum operating range:0° to 40° C
采購中心
