超微粉碎機詳細資料：

150-300目的粉碎細度、粉碎速度快、使用范圍廣、操作簡單、全機僅重14公斤可隨地使用。
1、小空間高速撞擊原理加上精密連續風選機構，可以使得粉碎顆粒度平均150目以上，zui高可達300目以上，是小型粉碎機中少有的可以產生有效產量且細度達到微粉級別的優品機器。
2、粉碎速度快，在保證細度的前提下，如珍珠每小時可粉碎3Kg。易粉碎藥材每小時可達到5Kg，具有粘性的物質則約為2Kg／h。
3、直刀、小彎刀、大彎刀多種刀型配制，可以有效減少物料本身之性質差異造成的不利粉碎之因素，故而使用范圍廣，礦物質、纖維質及稍具粘性的物質，均能粉碎*細的粒度。
4、操作簡單，無需過篩，粉碎后剩余物料極少，清理方便。
5、人性化設計，并有過載及誤開關保護裝置，操作無憂。
6、可連續使用，具強力風冷裝置，因此無使用時間之限制。
使用輕便，全機僅重14公斤可隨地使用。
應用范圍：
使用范圍廣泛，礦物質、纖維質及稍具粘性的物質，均能粉碎*細的粒度，可將物料粉碎成150—500目的超微細粉。適用于專門珍珠粉碎連鎖店或美容機構，連續工作，所得珍珠粉200目以上.
個性特點說明：
1、實驗用超微粉碎機為*一臺桌上型高細度粉碎機，全機僅重14kg，多數物料粉碎細度超過300目；
2、*一臺超高速電機（28000轉／分鐘）能連續運轉的粉碎機；
3、粉碎速度為1－5kg/h；
4、直刀、小彎刀、大彎刀多種刀型配制，可以有效減少物料本身之性質差異造成的不利粉碎之因素，故而使用范圍廣。

該型號參數：
體 積： 260×240×460mm
凈 重： 10kg
電 壓： 220V
功 率： 1200w
轉 速： 23000r/min
粉 碎 量： 1-3kg/h
細 度： 纖維性物質120-350目（1-3KG） 脆性物質12-1500目（2-5KG）

Ultrafine pulverizer details:

The purpose of 150-300 grinding fineness, grinding speed, wide range of use, simple operation, the machine weighs only 14 kg can use everywhere.

In 1, small space hypervelocity impact principle and precision for winnowing mechanism, can make the grinding particle size on average more than 150 mesh, highest can amount to more than 300 mesh, is a small mill in the rare can produce effective yield and fineness of powder level up machine.

2, grinding speed, to ensure the fineness of the premise, such as pearl per hour can be crushed 3Kg. Easily crushed herbs per hour can reach 5Kg, with a sticky substance is about 2Kg / h.

In 3, straight knife, small knife machete machete, a variety of formulation, can effectively reduce the material itself, the different nature of the adverse factors of the crushed, so the use of a wide range of minerals, fiber, and a bit of a sticky substance, can smash the very fine particle size.

4, simple operation, no need sieving, crushing the residual material is few, is convenient to clean.

5, humanized design, and has overload and error switch protection device, operation.

6, continuous use, powerful cooling device, so no time limit.

The use of light, the whole machine weighs only 14 kg can use everywhere.

Range of application:

The use of a wide range of minerals, fiber, and a bit of a sticky substance, can smash the very fine particle size, materials can be crushed into 150 - 500 purpose of ultra fine powder. Apply specifically pearl crushing chain or cosmetology organization, continuous work, the pearl powder more than 200 mesh.

Character description:

1, experiments using superfine disintegrator for only one desktop high fineness pulverizer, the whole machine weighs only 14kg, most of the material fineness of more than 300;

In 2, only one super high speed motor （ 28000 R / min） to the continuous operation of the mill;

3, crushing rate of 15kg/h;

In 4, straight knife, small knife machete machete, a variety of formulation, can effectively reduce the material itself, the different nature of the adverse factors of the crushed, so the use of a wide range of.

The model parameters of:

Volume: 260× 240 × 460mm

Net weight: 10kg

Voltage: 220V

Power: 1200W

Speed: 23000r/min

The crushing weight: 1-3kg/h

Fineness: fibrous substance 120-350 （ 1-3KG ） 12-1500 （ 2-5KG ） of brittle material