產品詳情：XP系列旋風分離器（XPSeriesCycloneseperator）工作原理：含塵氣體進入旋風分離器后，會在漩渦殼內回旋，在離心力、重力和負壓引力的綜合影響下，較粗的顆粒逐漸下沉，沿筒壁從下料口卸出，較細的顆粒隨負壓上升氣流進入后道除塵設備中收集

 

產品詳情：

XP系列·旋風分離器（XP Series · Cyclone seperator）
工作原理：
含塵氣體進入旋風分離器后，會在漩渦殼內回旋，在離心力、重力和負壓引力的綜合影響下，較粗的顆粒逐漸下沉，沿筒壁從下料口卸出，較細的顆粒隨負壓上升氣流進入后道除塵設備中收集。
working principle:
After the dusty gas enters the cyclone separator, it will swirl in the vortex shell. Under the combined influence of centrifugal force, gravity and negative pressure attraction, the coarser particles gradually sink and are discharged from the discharge port along the wall of the cylinder. With the rising airflow of negative pressure, the finer particles enter and collect in the following dust removal equipment.
設備特點：

1. 設備結構簡單，清理方便。
2. 用于產品的粗級分離，收集主產品，一定程度上可以減少過細粉的比例。
3. 內部易磨損部位（主要是漩渦殼內壁）可以按照需求采用工程陶瓷防護，從而滿足多數高新材料避免金屬雜質污染的要求。
4.  

1. The structure of the equipment is simple and easy to clean.
2. Used for coarse separation of products, collecting main products, to a certain extent can reduce the proportion of excessively fine powder.
3. The internal easy-to-wear parts (mainly the inner wall of the vortex shell) can be protected by engineering ceramics as required to meet the requirements of most high-tech materials to avoid metal impurity contamination.
 
技術參數表（Technical Data Sheet）：

注：具體匹配與產品粒度分布、含塵量、物料比重等有關，具體可與我司工程師溝通。
Note: The specific matching is related to the product particle size distribution, dust content, material specific gravity, etc., and specifics can be communicated with our engineers.
 
實物圖片(Physical picture)：