產品詳情：

GTM系列·全陶瓷無污染扁平式氣流粉碎機
GTM series · All ceramics contamination-free flat jet mill
工作原理：
預處理后的高壓工作介質（空氣、氮氣等）通過沿切向布置的粉碎噴嘴的特定結構后產生高速氣流，原料通過氣送進入粉碎腔，物料受到氣流加速互相碰撞并且與中圈摩擦剪切，不斷粉碎細化的物料逐漸脫離離心力，最終從機腔上蓋的出料口內被送出粉碎腔，通過管道進入后道收塵設備（旋風分離器、布袋除塵器等）。
working principle:
The pre-processed high-pressure working medium (air, nitrogen, etc.) generates a high-speed airflow after passing through the specific structure of the crushing nozzles arranged tangentially. The raw materials are sent into the crushing chamber through the air. The materials are accelerated by the airflow and collide with each other and friction and shear with the middle ring , The materials that are continuously crushed and refined gradually disengage from the centrifugal force, and finally are sent out of the crushing cavity from the discharge port of the upper cover of the machine cavity, and enter the downstream dust collection equipment (cyclone separator, bag dust collector, etc.) through the pipeline.

 
設備特點：

1.   結合“碰撞”、“摩擦”、“剪切”等多種粉碎原理，沖擊力強；
2.   主機內腔接觸物料部位可實現(xiàn)耐磨陶瓷防護，從而滿足多數高新材料避免金屬雜質污染要求（關鍵部位包括進料機構、腔體內襯、噴嘴、出料機構等）。
3.   適用于硬度7級以下、對于粒度分布集中度要求較寬的物料粉碎，特別是對具有一定粘附性的超細粉體以及熱敏性物料有較好的適用性，廣泛應用于高新陶瓷材料、鋰電池正負極材料、精細化工材料、精細非礦材料、食藥品原料、顏料涂料粉體等領域。
4.   可根據客戶需要，后置渦輪分級機以滿足去除大顆粒的要求；
5.   內部結構相對簡單，操作簡便，方便拆洗與組裝，且主機無運動部件，維護成本低，使用壽命長；
6.   匹配全流程自動化生產線，無粉塵外泄，綠色環(huán)保；勞動強度低；智能在線及遠程控制；
7.  

1. Combining multiple crushing principles such as "collision", "friction" and "shear", the impact is strong;
2. The parts of the main unit cavity that contact the material can achieve wear-resistant ceramic protection, thus meeting the requirements of most high-tech materials to avoid metal impurity contamination (the key parts include the feeding mechanism, the lining of the cavity, the nozzle, the discharging mechanism, etc.)
3. It is suitable for crushing materials with hardness below 7 and wide requirements for particle size distribution concentration, especially for superfine powder with certain adhesion and heat-sensitive materials. It is widely used in high-tech ceramic materials , Lithium battery positive and negative materials, fine chemical materials, fine non-mineral materials, food and pharmaceutical raw materials, pigment coating powder and other fields.
4. According to customer needs, the rear turbine classifier can meet the requirements of removing large particles;
5. The internal structure is relatively simple, the operation is simple, it is convenient for disassembly and assembly, and the main unit has no moving parts, the maintenance cost is low, and the service life is long;
6. Match the whole process automated production line, no dust leakage, green environmental protection; low labor intensity; intelligent online and remote control;
 
技術參數表（Technical Data Sheet）:

注：具體配置及處理效果需根據物料性質與加工要求確認，可與我司工程師溝通或來料試驗。
Note: The specific configuration and processing effect need to be confirmed according to the material properties and processing requirements, and  you can communicate with our engineers or come to do materials processing  test first..
 
實物圖片（Physical picture）：

 
GTM-200（中型機）                                          GTM-50（全功能實驗機型）
GTM-200（medium model）                                  GTM-50（full-function experimental model）
           
參考工藝流程圖（Reference process flow chart）：