概述 Descriptions

濕物料從干燥機一端投入后,在內筒均布的抄板器翻動下，物料在干燥器內均勻分布與分散，并與并流(逆流)的熱空氣充分接觸，加快了干燥傳熱，傳至推動力。在干燥過程中，物料在帶有傾斜度的抄板和熱氣流的作用下，可調控地運動至干燥機另段星形卸料閥排出成品。

After wet materials are put in from one end of the dryer, the materials are evenly distributed and dispersed in the dryer under the turning of the paper-making machines evenly distributed in the inner cylinder, and are fully contacted with the hot air flowing in parallel (countercurrent), thus accelerating the drying heat transfer and transmitting to the driving force. In the drying process, the material can move to the other star-shaped discharge valve of the dryer to discharge the finished product under the action of the inclined papermaking plate and hot air flow.

應用Applications

1.化工、礦山、冶金等行業大顆粒，比重大物料干燥，如:礦山、高爐礦渣、煤、金屬粉末、磷肥、硫銨。

2.對有特殊要求的粉末、顆粒狀物料的干燥，如:Hp發泡劑、酒糟渣、輕質碳酸鈣、活性白土、磁粉、石墨、藥渣。

3.要求低溫干燥，且需大批量連續干燥的物料。

1. Large particles in chemical, mining and metallurgical industries are drier than majormaterials, such as mine, blast furnace slag, coal, metal powder, phosphate fertilizer and ammonium sulfate.

2. Drying powder and granular materials with special requirements, such as Hp foaming agent, distiler's grains residue, light calcium carbonate, activated clay, magnetic powder, graphite and dregs.

3. Materials requiring low-temperature drying and continuous drying in large quantities.

特點 Features 

轉筒干燥器機械化程度高，生產能力較大。

流體通過筒體阻力小，功能消耗低。

對物料特性的適應性比較強。

操作穩定，操作費用較低，產品干燥的均勻性好。.

Rotary drum dryer has high mechanization degree and large production capacity.

The resistance of fluid passing through the cylinder is small and the function consumption is low.

Strong adaptability to material characteristics.

Stable operation, low operation cost and good uniformity of product drying.

流程圖 Flow chart

技術參數 Technical parameters