可焊接生物制藥軟管 CJFLEXBIO TH

半透明軟管，硬度61A，(可定制50A和69A),可無菌焊接，生物制藥用，600RPM轉速下蠕動泵連續(xù)使用壽命500小時，流量變化在7%以內，是款超過500小時的可焊接生物制藥用蠕動泵管用軟管

應用范圍：
細胞培養(yǎng)基、細胞發(fā)酵
診斷設備、實驗室研究
藥品生產、疫苗生產、試劑配制
植物產品生產
蠕動泵管段
無菌灌裝和配藥系統(tǒng)

產品特點：
1.超高焊接強度，可進行熱封口或熱焊接
2. 不致熱、無熱源無細胞毒性，非溶血，生物兼容性好
3.內壁超光滑，低血小板粘附率，低蛋白質結合率，低析出物，可滲透性明顯低于硅膠
4. 耐濃酸和濃堿
5.在-45~+135C范圍內均可維持高彈性
6.可輻射滅菌、EO滅菌
7. ISO7級潔凈間生產，符合FDA、USP VI等標準，嚴格遵循GMP指南制造
8.可通過焚燒進行安全處理

CJFLEX TH is a translucent tube with hardness of 61A (can be customized for 50A and 69A). It can be aseptically welded for biopharmaceuticals. The peristaltic pump has a continuous service life of 500 hours at 600 RPM, and the flow rate changes within 7%. It is the first weldable peristaltic pump hose for biopharmaceutical use over 500 hours.

Application:
Cell culture medium and cell fermentation
Diagnostic equipment, laboratory research
Drug production, vaccine production, reagent preparation
Production of plant products
Peristaltic pump pipe section
Aseptic filling and dispensing system

Features/Benefits:
Super high welding strength, can be used for hot sealing or welding
No heat, no heat source, no cytotoxicity, no hemolysis, good biocompatibility
The inner wall is super smooth, with low platelet adhesion rate, low protein binding rate, low precipitate, and its permeability is significantly lower than that of silica gel
Strong acid and alkali resistance
High elasticity can be maintained in the range of - 45℃ to +135℃
It can be sterilized by radiation and EO
ISO 7 clean room production, in line with FDA, USP VI and other standards, in strict accordance with GMP guidelines
It can be safely treated by incineration