廣泛應用：生物醫學、診斷試劑、制藥、化工、液體工作站吸液、退液等精密定量分裝。
widely used: raw preparations, pharmaceutical, chemical, liquid workstation suction, liquid withdrawal and other precision quantitative packaging.
產品性能：
l 采用精密陶瓷活塞桿與活塞套腔體結構。
l 采用非接觸式吸液與退液，無交叉污染。
l 精密絲桿電機往復伸縮吸液與推液。
l 體積小、高精度、耐腐蝕、耐磨性、密閉性、一致性可靠。
l 無動態密封件，無易損件，零維修及保養成本。
l 吸頭采有用活接方式，可適多種規格。
l Precision ceramic piston cavity structure is used.
l Non-contact suction and withdrawal are adopted, without cross contamination.
l Recreciprocating suction and push fluid of precision screw motor
l Small volume, high precision, corrosion resistance, wear resistance, air tightness, and reliable consistency.
l No dynamic seals, no vulnerable parts, zero maintenance and maintenance cost.
l Sucsuction is useful for universal live connection, can be suitable for a variety of specifications.
技術參數 Technical Parameters
規格型號 Specification and Model | JKR-YYB-A50UL | JKR-YYB-A100UL | JKR-YYB-A300UL | JKR-YYB-A500UL |
量程 Measurement e | 50µL | 100µL | 250µL | 500µL |
活塞材質 Piston material | 氧化鋁/氧化鋯 | |||
驅動方式 Drive mode | 四線精密絲桿步進電機 Four-wire precision wire rod stepping motor | |||
馬達轉速 Motor rotation speed | 1-180r/min | |||
吸排液精度（CV） Precision of suction fluid | 2.0% | |||
流動壓力 Flow pressure | ＜0.30Mpa | |||
行程 Travel | Max18mm | |||
通訊接口 Communication interface | RS232，RS485，僅當選配電機驅動ISC1000時 | |||
運行噪音 Operating noise | <60 dBA，僅室內使用 | |||
運行溫濕度 Operating temperature and humidity | 15°C to 40°C and 20% to 95% RH at 40°C, 無冷凝 | |||
介質溫度 Media humidity | 15°C to 40°C | |||
電源要求 Power supply requirements | 24VDC 500mA | |||
注：以上型號緊我司出貨量大的代表型號產品，歡迎下單訂制！產品的2D、3D安裝尺寸圖請聯系我司客戶、銷售或下載。
Note: the above models are close to our large shipments of the representative model products, welcome to order customized! For the 2D,3D installation size diagram, please contact our customer, sales or website for download.
采購中心
