衛生級不銹鋼發酵罐罐頂裝置生產廠家

衛生級不銹鋼發酵罐罐頂裝置生產廠家

1、概述：本組合件適用于啤酒等行業，安裝于100~400m3發酵罐，清酒罐罐體的頂部。組合件由法蘭平蓋，止回閥（氣液分流器）、自動排氣閥、防止真空閥、視鏡及洗罐器（洗球）組成。它具有保壓、穩壓、防止真空以及氣體回心等作用。 1、 將組件裝置于罐頂人孔法蘭上，連接氣液分流器接管品。 2、自動排氣閥與防止真空閥均為杠桿結構，可調杠桿上重錘的位置來設定工作壓力。調整后應將重錘上的緊定螺釘緊固好。 3、自動排氣閥可調整螺栓限定杠桿起跳高度來控制排氣量。 4、罐體工作時，氣液分流器接管口排出回收氣體，洗罐時，該接管口由通發洗滌液。

衛生級不銹鋼發酵罐罐頂裝置生產廠家設備特點：
1、結構緊湊，動作靈敏、安全可靠。
2、真空閥、安全閥均采用雙支承面設計，加式精度高，復位準確。 3、所有密封封面均采用雙密封面設計，密封效果好，不易泄漏。
4、全新無菌化衛生設計，自帶內清洗裝置，及時清洗閥門內部，清除衛生死角。
5、真空閥底部高有氣動排空裝置，及時排空閽體內的液體及CIP清洗液殘余。
6、清洗干凈*，洗球在360°范圍內噴射，罐內無清洗死角。
衛生級不銹鋼發酵罐罐頂裝置生產廠家使用說明：
1、將罐頂組件用螺栓安裝于直接焊接在罐頂部的對接人孔法蘭上，并保證可靠的密封連接CIP接管口即可投入使用。
2、彈簧式排氣閥和彈簧式真空閥可調整設定恒定的工作壓力。
3、彈簧式調節排氣閥可在0.02-0.2Mpa范圍內任意調節排氣。
4、罐體工作時，CIP接管口排出回收氣體；洗罐時，該接管口則通上洗滌液。
衛生級不銹鋼發酵罐罐頂裝置生產廠家主要技術參數：
使用壓力：0.3Mpa
使用溫度：-20～120℃
排氣壓力：0.02～0.2Mpa
吸氣壓力：-50～400mmH2O
清洗壓力：0.3～0.5Mpa

衛生級不銹鋼發酵罐罐頂裝置生產廠家

英文介紹：

Manufacturer of sanitary stainless steel fermentation tank top device

1. Overview: This assembly is suitable for beer and other industries, and is installed on the top of 100~400m3 fermentation tanks and sake tanks. The assembly consists of a flange flat cover, a check valve (gas-liquid splitter), an automatic exhaust valve, a vacuum prevention valve, a sight glass and a tank washing device (ball washing). It has the functions of maintaining pressure, stabilizing, preventing vacuum and gas returning to the center. 1. Install the components on the manhole flange on the top of the tank, and connect the gas-liquid splitter to the pipe. 2. Both the automatic exhaust valve and the anti-vacuum valve have a lever structure, and the position of the heavy hammer on the lever can be adjusted to set the working pressure. After adjustment, tighten the set screw on the heavy hammer. 3. The automatic exhaust valve can adjust the bolt to limit the take-off height of the lever to control the exhaust volume. 4. When the tank is working, the gas-liquid splitter nozzle will discharge the recovered gas. When the tank is washed, the nozzle will send out washing liquid.

Equipment characteristics of sanitary stainless steel fermentation tank top device manufacturer:

1. Compact structure, sensitive action, safe and reliable.

2. Both the vacuum valve and the safety valve are designed with double supporting surfaces, with high precision and accurate resetting. 3. All sealing covers adopt double sealing surface design, which has good sealing effect and is not easy to leak.

4. Brand-new aseptic hygienic design, with internal cleaning device to clean the inside of the valve in time to remove sanitary dead corners.

5. There is a pneumatic emptying device at the bottom of the vacuum valve, which can empty the liquid in the body and the residue of CIP cleaning liquid in time.

6. Clean thoroughly, the ball is sprayed in the range of 360°, and there is no dead corner in the tank.

Instructions for manufacturers of sanitary stainless steel fermentation tank top device:

1. Install the tank top assembly with bolts on the butt joint manhole flange directly welded to the top of the tank, and ensure a reliable sealing connection with the CIP port before it can be put into use.

2. Spring-type exhaust valve and spring-type vacuum valve can be adjusted to set a constant working pressure.

3. The spring-type adjustable exhaust valve can adjust the exhaust arbitrarily within the range of 0.02-0.2Mpa.

4. When the tank is working, the CIP port will discharge the recovered gas; when washing the tank, the port will be filled with washing liquid.

Main technical parameters of the manufacturer of sanitary stainless steel fermentation tank top device:

Working pressure: 0.3Mpa

Operating temperature: -20～120℃

Exhaust pressure: 0.02～0.2Mpa

Suction pressure: -50～400mmH2O

Cleaning pressure: 0.3～0.5Mpa