| 各型號主要技術參數 main specifications: |
型號 Model | 分離筒內徑 Cylinder Bore Diameter | 分離筒容積 Cylinder Cubage | 分離筒轉速 Cylinder Speed | zui大離心力 R.C.F. | 通水能力 Throughput Capacity | 電機功率 Motor Power | 電源 Operating Voltage | 重量 Weight | 外形尺寸 Dimension |
GQ145 | φ145(mm) | 11 (L) | 14000(r/min) | 15900(×g) | 1.5 (T/h) | 3 (kw) | AC380(V) | 700(kg) | 890×580×1670(mm3) |
GQ125 | φ125(mm) | 8 (L) | 15000(r/min) | 15700(×g) | 1.4 (T/h) | 3 (kw) | AC380(V) | 600(kg) | 800×550×1600(mm3) |
GQ105 | φ105(mm) | 6 (L) | 16000(r/min) | 15050(×g) | 1.2 (T/h) | 3 (kw) | AC380(V) | 500(kg) | 700×450×1600(mm3) |
GQ105B | φ105(mm) | 6 (L) | 16000(r/min) | 15050(×g) | 1.2 (T/h) | 3 (kw) | AC380(V) | 500(kg) | 700×450×1600(mm3) |
GF105 | φ105(mm) | 6 (L) | 16000(r/min) | 15050(×g) | 1.2 (T/h) | 3 (kw) | AC380(V) | 500(kg) | 700×450×1600(mm3) |
GQ75 | φ75 (mm) | 2 (L) | 20000(r/min) | 16700(×g) | 0.2 (T/h) | 1.2(kw) | AC380(V) | 250(kg) | 660×390×1200(mm3) |
GQ75 | φ75 (mm) | 2 (L) | 20000(r/min) | 16700(×g) | 0.2 (T/h) | 1.2(kw) | AC380(V) | 250(kg) | 660×390×1200(mm3) |
| 工作原理： |
| 分離機由機身、傳動裝置、轉鼓、集液盤、進液軸承座組成。轉鼓上部是撓性主軸，下部是阻尼浮動軸承，主軸由聯接座緩沖器與被動輪聯接，電動機通過傳送帶、張緊輪將動力傳遞給被動輪、從而使轉鼓繞自身軸線超速旋轉。形成*的離心力場。物料由底部進液口射入，離心力迫使料液沿轉鼓內壁向上流動，且因料液不同組分的密度差而分層。 GF型，密度大的液相形成外環，密度輕的液相形成內環，流動到轉鼓上部各自的排液口排出，微量固體沉積在轉鼓壁上，待停機后人工卸出。GQ型，密度較大的固體微粒逐漸沉積在轉鼓內壁形成沉渣層，待停機后人工卸出，澄清后的液相流動到轉鼓上部的排液口排出。 |
| 主要用途： |
| 高速管式分離機主要用于生物醫學、中藥制劑、保健食品、飲料、化工等行業的液固或液液固三相分離。是目前用離心法進行分離的理想設備。經多年研究開發出血液分離離心機。zui小分離顆粒為1微米，特別對一些液固相比重差異小，固體粒徑細、含量低，介質腐蝕性強等物料的提取、濃縮、澄清較為適用。 特殊物料的分離可帶料來本公司做選型分離試驗，公司也可根據客戶要求定制特殊材質的管式機。 |
Working prninciple: |
| This separator is consisted of man body, driving device, bowl collecting pan and liquid-in bearing . the upper of the bowl is fiexible mainshaft and thelower of it is damp floating bearing. The mainshaft is connected through and with avbuffer of by a motor through driving wheel and tension gear to make the bowl rotate around its own ax is at a extra speed and form a strong centrifuge force field. The stocd flows into the liquid inlet from the bottom and is forced by centrifuge force to flow upto and along theinner wall of the bowl and then is separated the different layer according to density difference of the different liquid components ,GFtype Liquid phase with great density forms an outer loop and liquid phase with light density forms an inner loop, and flows to the upper of the bowl out of their respective liquid outlet at the bowl is upper after clarification. |
| Main purposes: |
| High speed tubular centrifuge is an ideal instrument in biology, traditional medicine preparation, health food , chemistry for liquid separating and solid liquid separating. The minimum diameter of dissociative granule is 1 micron. It is especially separated for low differentia proportion, small granularity, low solid content, strong medium corrosion, fuel distilled, concentration and clarify. If you want to separate special material, please bring it to our company to do the separating test. We can instrument requested by customer. |
采購中心
