- 小型膠囊包裝機性能特點
采用國內新型的大傳動機構，由排鏈帶動主傳動軸，免除了其它齒輪傳動的誤差和噪音。
It adopts the newest type high-power transmission mechanism to arrange the chain and drive the main driving shaft. The errors and noises of other gear wheel transmission can be avoided.
- 電器采用進口控制系統，便可按照客戶要求，配置缺料漏補裝置和缺粒檢測剔除裝置。
Imported controlling system is adopted; also it can be equipped with detecting and rejection function device for number of medicines according to the user’s requirement.
3、采用光電控制系統，PVC、PTP、硬鋁包裝自動送料、廢邊自動沖切裝置，確保超長距離多工位同步穩定性。
It adopts photoelectrical controlling system to make PVC, PTP, Aluminum/Aluminum material to be automatically fed and waste side to be cut automatically to guarantee the Synchronous stability of over- length distance and multi stations.
4、可另配光電檢測校正裝置，配進口步進電機牽引，圖文對版印刷包裝，優化包裝物檔次。
It can be optional equipped with photocell correction device, imported stepper motor traction and image- character register to optimize packing grade.
5、本機適用行業：食品、藥品、科研、五金、電子泡罩密封包裝。
The machine is suitable for industries of foodstuff, medicine, medical instruments, hardware, electronics and etc for packing.
小型膠囊包裝機布置圖
技術參數
| 型號 Model | DPP-80 |
| 沖裁次數 Punch frequency | 10-33次/分 10-33times/min |
| 生產能力 Production capacity | 2400版/時 2400plates/hour |
| zui大成型面積及深度 Max. Forming area & Depth | 110x70(標準深度≦15）（mm）zui大深度25mm（定制） 110x70(standard depth ≦15mm), Max. Depth 25mm( As adjusted |
| 標準行程范圍 Standard Stroke range | 30-80毫米( 可按客戶要求設計 ) 30-80mm(can be designed as per user’s required) |
| 標準版塊 Standard plate size | 80*57mm ( 可按客戶要求設計 ) 80x57mm (can be designed as per user’s required) |
| 空氣壓力 Air pressure | 0.4-0.6兆帕 0.4-0.6Mpa |
| 耗氣量 Compressed air required | （空壓機）≥0.3m3/min Air compressor≥0.3m3/min
|
| 電源總功率 Total power supply | 220V 50Hz 2.4Kw |
| 主電極功率 Main motor | 0.75Kw |
| PVC硬片 PVC hard Film | 0.15-0.5*110毫米(mm) 0.15-0.5*110 (mm)
|
| PTP鋁箔 PTP Aluminum film | 0.02-0.035*110毫米(mm) 0.02-0.035*110 (mm) |
| 透析紙 Dialysis Paper | 50-100g*110毫米（mm） 50-100g*110（mm）
|
| 模具冷卻 Mould cooling | 自來水或循環水 Tap water or Recycling water |
| 外型尺寸 Overall Dimension | 1840x590x1100毫米(mm)(LxH) 1840x590x1100 (mm)(LxH) |
| 重量 Weight | 凈重415千克（Kg）毛重 465（kg) Net 415kg Gross weight: 465kg |
| 噪聲指標 Noise index | <75dBA |
工作流程
Work process
成型（上下加熱）
Forming ( up and down heating)
熱封（上加熱）
Heating Sealing ( up heating)
打碼
Embossing
- 壓痕（可微量加熱）
Impression
- 切刀
Cutter
- 成型輸出成品
Finished product output
六：包裝樣品圖
采購中心
