制藥網>產品庫>儀器儀表>其它儀器儀表>其它儀器儀表>>德國Siegerland

德國Siegerland

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱尚階（上海）自動化設備有限公司
品牌其他品牌
型號
所在地上海市
廠商性質經銷商
更新時間2018/4/4 14:53:43
訪問次數507

產品標簽:

德國Siegerland 德國Siegerland 德國Siegerland 德國Siegerland 德國Siegerland

在線詢價收藏產品查看電話同類產品

聯系我們時請說明是制藥網上看到的信息，謝謝!

索取相關資料

公司介紹主營產品

尚階（上海）自動化設備有限公司是主要經營歐美進口元器件的公司主要暴扣，儀器儀表，泵，閥傳感器，工裝夾具，機廠零配件，汽車零配件等等

展開顯示更多內容

儀器儀表泵閥傳感器

產品簡介在線詢價

產地	進口	產品新舊	全新

德國Siegerland Bremsen制動器聯軸器

德國ALTHEN GmbH傳感器數據記錄器通用振動傳感器

德國Siegerland 產品信息

德國Siegerland Bremsen制動器聯軸器

德國ALTHEN GmbH傳感器數據記錄器通用振動傳感器

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

產品系列：

壓力傳感器和轉換器
力傳感器和稱重傳感器
扭矩傳感器
位置和位移傳感器
旋轉角度傳感器
傾角和傾斜傳感器
加速度計
振動傳感器
速率傳感器
信號調理
數據采集和數據記錄器

DATAQ數據記錄儀
壓力測量
標準壓力傳感器和變送器
保費壓力傳感器
二次加壓標準
微型壓力傳感器
多通道壓力測量系統
差壓傳感器
觸覺陣列壓力傳感器和壓力

力測量
圓柱力傳感器和稱重傳感器
微型稱重傳感器
薄型稱重傳感器
甜甜圈稱重傳感器
的S -梁稱重傳感器
彎曲/剪切梁稱重傳感器
稱重模塊
負荷檢測銷
多軸力和力矩傳感器
特殊用途稱重傳感器

扭矩測量
旋轉扭矩傳感器
反作用扭矩傳感器
微型傳感器的反作用扭矩
多軸力和力矩傳感器

速率傳感器
基于MEMS的速率傳感器技術為基礎的科氏
位置測量
電位位置傳感器
LVDT的傳感器
電感式位置傳感器
本質安全，電感式位置傳感器
顯示和LVDTs和RVDTs測量放大器
非接觸式埃迪電流傳感器和測量系統

旋轉角度傳感器
感應式旋轉角度傳感器輸出信號與交流
感應式旋轉角度傳感器輸出信號與直流
本質安全，感應旋轉角度傳感器
電位旋轉角度傳感器

傾斜測量系統
傾角和伺服傾角
伺服傾角測量系統
工業傾斜測量和開關一軸系統
工業傾斜測量和開關兩軸系統
數字量角器
電容式電子傾角傳感器

加速度測量
伺服加速度計
與MEMS加速度傳感器
三軸Acclerometers
振動測試
通用振動傳感器
小型和高頻率的振動傳感器
微型三軸振動傳感器和標準
振動變送器在4 ... 20 mA的2線制
地震/低頻振動傳感器
高溫振動傳感器
用于特殊應用的振動傳感器
Vibromatrix ®振動測量系統
IEPE傳感器和放大器，電源系統的IEPE
電荷放大器
便攜式測量儀器
它 - 振動監測智能變送器
附件

信號調節
顯示和應變計傳感器測量放大器
顯示和LVDTs和RVDTs測量放大器

數據采集
數據記錄器，集成顯示
獨立數據記錄器
基于PC的數據采集系統
低成本數據記錄器和入門工具包
數據采集系統通道展開
數據采集軟件
Vibromatrix ®振動測量系統

通用振動傳感器

Model	Measurement Range	Sensitivity	Frequency Range[±3dB]	Noise	Temp. Range	Datasheet
	780A Standard transducer with good signal-noise performance	±80 g	100 mV/g ±5 %	0.4...14000 Hz	500 µg [2.5Hz...25kHz]	-50...+120°C	Vibration Sensor780Aadd to notepad
	780B \| 780C Low-cost versions of model 780A	±80 g	100 mV/g ±10%(780B) ±15%(780C)	0.4...14000 Hz	500 µg [2.5Hz...25kHz]	-50...+120°C	Vibration Sensor 780B / 780Cadd to notepad
	785A General purpose vibration sensor with side connector	±80 g	100 mV/g ±10 %	1...12000 Hz	1260 µg [2.5Hz...25kHz]	-50...+120°C	Vibration Sensor785Aadd to notepad
	786A (2-Pin MIL-C-5015) 786C (BNC connector) 786F (5 m integr. cable) Standard vibration sensor	±80 g	100 mV/g ±5 %	0.5...14000 Hz	700 µg [2.5Hz...25kHz]	-50...+120°C	Vibration Sensor786Aadd to notepad
	787A General purpose vibration sensor with side connector	±80 g	100 mV/g ±5 %	0.7...10000 Hz	700 µg [2.5Hz...25kHz]	-50...+120°C	Vibration Sensor787Aadd to notepad
	793 \| 793-35 Premium transducer for general purpose (793-35 with ATEX approval)	±80 g	100 mV/g ±5 %	0.5...15000 Hz	600 µg [2.5Hz...25kHz]	-50...+120°C	Vibration Sensor793 add to notepad
	797 \| 797-35 Premium transducer with side connector (797-35 with ATEX approval)	±50 g	100 mV/g ±5 %	1...12000 Hz	600 µg [2.5Hz...25kHz]	-50...+120°C	Vibration Sensor797 add to notepad

Miniature and High-frequency Vibration Sensors

Model	Measur. Range	Sens.	Freq. Range / Noise	Weight	Mounting	Temp. Range	Datasheet
AV3032A Miniature vibration sensor	±500 g	10 mV/g ±10 %	0.66...12000 Hz [±3 dB] / 0.007 g_rms	approx. 1.5 gram (without cable)	Adhesive	-50...+120°C	Vibration SensorAV3032 add to notepad
AV3032A1 Miniature vibration sensor	±1000 g	5 mV/g ±10 %	0.66...12000 Hz [±3 dB] / 0.007 g_rms	approx. 1.5 gram (without cable)	Adhesive	-50...+120°C	Vibration SensorAV3032 add to notepad
AV3200 Miniature vibration sensor for high shock	±2500 g to ±70000 g	nom. 0.05 mV/g to 2.0 mV/g	nom. 0.16 Hz [-3 dB]	approx. 6 gram	Thread	-50...+120°C	Vibration SensorAV3200 add to notepad
AV3220E Miniature vibration sensor with through hole and 5-44 side connector	±500 g	10 mV/g ±10 %	0.66...10000 Hz [±15 %] / ---	approx. 2.7 gram	Through hole incl. 2-56 screw	-50...+120°C	add to notepad
AV3211A1 \| AV3211M42 Miniature Vibration Sensor with Through Hole	A1 ±500 g M4 ±50 g	10 mV/g 100 mV/g nom.	0.2 Hz nom. [-3 dB] / 0.0005 g_rms(A1) 0.0001 g_rms(M4)	approx. 10 gram	Through hole	-50...+120°C	Vibration SensorAV3211 add to notepad
712F High frequency sensor with integral cable	±60 g	100 mV/g ±10 %	3...25000 Hz [±3 dB] / 1000 µg [2.5Hz...25kHz]	approx. 35 gram (without cable)	Through hole	-50...+120°C	Vibration Sensor 712Fadd to notepad
732A \| 732AT High frequency sensor with side or top connector	±500 g	10 mV/g ±5 %	0.5...25000 Hz [±3 dB] / 200 µg [2.5Hz...25kHz]	approx. 13 gram	Thread	-50...+120°C	Vibration Sensor 732Aadd to notepad
736 \| 736T High frequency sensor with side or top connector	±50 g	100 mV/g ±5 %	2...25000 Hz [±3 dB] / 150 µg [2.5Hz...25kHz]	approx. 13 gram	Thread	-50...+120°C	Vibration Sensor 736add to notepad

Triaxial Miniature and Standard Vibration Sensors

Model	Meas. Range	Sensitivity	Freq. Range / Noise	Weight	Mounting	Temp. Range	Datasheet
AV0823B Triaxial vibration sensor	±12 g	500 mV/g ±5 %	0.07...6000 Hz [-3 dB] / <26 µg	approx. 365 gram	Thread	-30...+90°C	Vibration SensorAV0823Badd to notepad
AV3023A \| AV32023AT Triaxial miniature vibration sensor AV3023AT with integrated TEDS chip	±500 g	10 mV/g -10/+15 %	1.5...10000 Hz [-5/+15 %] / 0.0095 g_rms	approx. 3.0 gram AV3023AT: 4.5 gram	Adhesive	-50...+120°C	Vibration SensorAV3023 add to notepad
AV3023AH Triaxial miniature vibration sensor for temperatures up to 160 °C	±500 g	10 mV/g -10/+15 %	1.5...10000 Hz [-5/+15 %] / 0.0095 g_rms	approx. 3.0 gram	Adhesive	-50...+160°C	Vibration SensorAV3023 add to notepad
AV3023M30 Triaxial miniature vibration sensor for temperatures up to 163 °C	±500 g	10 mV/g -10/+15 %	1.2...5000 Hz [-5/+15 %] / 0.007 g_rms	approx. 3.0 gram	Adhesive	-50...+163°C	Vibration SensorAV3023 add to notepad
AV3023M28 Triaxial miniature vibration sensor	±1000 g	5 mV/g -10/+15 %	1.5...10000 Hz [-5/+15 %] / 0.0095 g_rms	approx. 3.0 gram	Adhesive	-50...+120°C	Vibration SensorAV3023 add to notepad
AV3023M25 \| AV3023M25T Triaxial miniature vibration sensor AV3023M25T with integrated TEDS chip	±500 g	10 mV/g -10/+15 %	1.5...5000 Hz (Axis 1,2) 1.5...10000 Hz (Axis 3) [-5/+15 %] / 0.0095 g_rms	approx. 4 gram AV3023M25T: 6.2 gram	Thread	-50...+120°C	Vibration SensorAV3023 add to notepad
AV3023A4 Triaxial miniature vibration sensor	±1000 g	5 mV/g -10/+15 %	1.5...10000 Hz [-5/+15 %] / 0.0095 g_rms	approx. 4 gram	Thread	-50...+120°C	Vibration SensorAV3023 add to notepad
AV3133A1 Triaxial ultra miniature vibration sensor in IEPE technology	±500 g	9 ... 14 mV/g	0.25...7000 Hz (Axis 1, 2) 0.25...10000 Hz (Axis 3) [±10 %] / 0.02 g_rms	approx. 0.8 gram (without cable)	Adhesive	-50...+120°C	Vibration SensorAV3133A1add to notepad
AV3143M10 Triaxial miniature vibration sensor	±50 g	100 mV/g	0.5 ... 3000 Hz [±5 %] / 0,0007 g_rms	approx. 14 gram	through hole	-50...+85°C	Vibration SensorAV3143M10add to notepad
AV3143/DIN4150-3 Triaxial sensor for vibration measurement in buildings acc. to DIN4150-3	±50 g	100 mV/g	acc. to DIN4150-3	approx. 4 kg	Stand acc. to DIN4150-3 wall and ceiling mounting	-50...+85°C	Vibration Sensor AV-DIN add to notepad
AV3293A Triaxial miniature vibration sensor in IEPE technology	±7 g	500 mV/g ±10 %	0.25...4000 Hz [±10 %] / 0.0002 g_rms	approx. 8.8 gram	Thread	-50...+85°C	Vibration SensorAV3293Aadd to notepad
993A Triaxial vibration sensor	±50 g	100 mV/g ±10 %	2...2000 Hz [± 10%]	approx. 88 gram	Through hole	-50...+120°C	Vibration Sensor 993Aadd to notepad
993A-5 Dreiaxialer Aufnehmer mit integriertem Kabel	±50 g	100 mV/g ±10 %	2...2000 Hz [±10 %]	approx. 90 gram	Through hole	-50...+120°C	Vibration Sensor993A-5 add to notepad
993B-5 993B-6 993B-7 Triaxial vibration sensor with mit integral cable	±160 g ±80 g ±40 g	25 mV/g 50 mV/g 100 mV/g ±10 %	Z-Axis: 2...10000 Hz X-, Y-Axis: 2...7000 Hz [±3 dB]	approx. 134 gram	Thread	-50...+120°C	Vibration Sensor 993Badd to notepad

Vibration Transmitters in 4...20 mA 2-wire Technique

Model

Meas. Range

Repeat.

Freq. Range [±3dB]

Dynamic Output
Range	Sens.[±10%]

Temp. Range

Datasheet

PC420Ax-yy

PC420Vx-yy

Vibration transmitter with RMS and equivalent peak output signal

see table 1

2 %

1...2000 Hz

3.5...2000 Hz

---	---
---	---

-40...+105°C

PC420Ax-yy

PC420Vx-yy

add to notepad

PC420ATP-yy

PC420VTP-yy

Vibration transmitter with true peak output signal

see table 1

2 %

4...2000 Hz

---	---
---	---

-40...+85°C

PC420ATP-yy

PC420VTP-yy

add to notepad

PC420Axx-yy-EX (1)

PC420Vxx-yy-EX (1)

PC420Axx-yy-IS (2)

PC420Vxx-yy-IS (2)

Explosion proof vibration transmitter

see table 1

2 %

4...2000 Hz

---	---
---	---
---	---
---	---

-40...+85°C

PC420Axx-yy-EX

PC420Vxx-yy-EX

PC420Axx-yy-IS

PC420Vxx-yy-IS

add to notepad

PC420Axx-yy-Dz

PC420Vxx-yy-Dz

Vibration transmitter with add. dynamic IEPE output signal

see table 1

2 %

4...2000 Hz

20g or 1.5ips	see tab. 1
20g or 1.5ips	see tab. 1

-40...+85°C

PC420Axx-yy-Dz

PC420Vxx-yy-Dz

add to notepad

PC421xxx-yy

PC421xxx-yy-IS (2)(3)

PC421xxx-yy-Dz

Vibration transmitter with side connector

see table 1

2 %

4...2000 Hz

---	---
---	---
20g or 1.5ips	see tab. 1

-40...+85°C

Vibration Transmitter
PC421 add to notepad

PC423xxx-yy

PC423xxx-yy-IS (2)(3)

PC423xxx-yy-Dz

Vibration transmitter with integral cable

see table 1

2 %

4...2000 Hz

---	---
---	---
20g or 1.5ips	see tab. 1

-40...+85°C

Vibration Transmitter
PC423 add to notepad

PC425xxx-yy

PC425xxx-yy-Dz

Vibration transmitter with side connector and additional temperature output
[-50...+85°C / 10 mV/K]

see table 1

2 %

4...2000 Hz

---	---
20g or 1.5ips	see tab. 1

-40...+85°C

Vibration Transmitter
PC425 add to notepad

PC427xxx-yy

PC427xxx-yy-Dz

Vibration transmitter with integral cable and additional temperature output
[-50...+85°C / 10 mV/K]

see table 1

2 %

4...2000 Hz

---	---
20g or 1.5ips	see tab. 1

-40...+85°C

Vibration Transmitter
PC427 add to notepad

Notes:
(1) Explosion proof acc. to ATEX EEx d IIC T3C; available with CSA certificate
(2) Intrinsically safe acc. to ATEX EEx ia IIC T3; intrinsically safe only with ISBS-420 safety barrier; available with CSA certificate
(3) Options ATP and VTP not available

Safety Barriers:
ISBS-420-03
ISBS-420-06

for intrinsically safe 4 ... 20mA sensors, mounting stud M4 x 9
for intrinsically safe 4 ... 20mA sensors, DIN rail mounting

Vibration Transmitters in 4...20 mA 2-wire Technique (Table 1)

xxx (4 ... 20 mA Output)	-yy (Measurement Range)	-Dz (Dynamic Output)
Acceleration:
AR = Acceleration, rms AP = Acceleration, equivalent peak ATP = Accleration, true peak	-05 = 5 g (49 m/s²) -10 = 10 g (98 m/s²) -20 = 20 g (196 m/s²) -50 = 50 g (490 m/s²)	-DA = dynamic acceleration: 100 mV/g (10.2 mV/(m/s²)) -DV = dynamic velocity: 100 mV/ips (3.94 mV/(mm/s))
Velocity:
VR = Velocity, rms VP = Velocity, equivalent peak VTP = Velocity, true peak	-05 = 0.5 ips (12.8 mm/s) -10 = 1.0 ips (25.4 mm/s) -20 = 2.0 ips (50.8 mm/s) -30 = 3.0 ips (76.2 mm/s) -50 = 5.0 ips (127 mm/s)	-DA = dynamic acceleration: 100 mV/g (10.2 mV/(m/s²)) -DV = dynamic velocity: 100 mV/ips (3.94 mV/(mm/s))
Table 1 applies to vibration transmitter series PC420, PC421, PC423, PC425 and PC427. Please note, not all options are available with all series. See datasheet for detailed specification

Seismic and Low-frequency Vibration Sensors

Model	Measurement Range	Sensitivity	Freq. Range [±3dB]	Noise [2,5Hz...25kHz]	Temp. Range	Datasheet
728A \| 728T Sensor with high sensitivity	±15 g	500 mV/g ±5 %	1...10000 Hz	30 µg	-50...+120°C	Vibration Sensor728A add to notepad
731-207 Seismic vibration sensor	±0,5 g	10 V/g ±10 %	0.2...1300 Hz	2 µg	0...+80°C	Vibration Sensor 731-207 add to notepad
731A Ultra-quiet seismic vibration sensor	±0,5 g	10 V/g ±10 %	0.05...500 Hz	0.5 µg	-10...+65°C	Vibration Sensor731A add to notepad
731A/P31 Seismic vibration measurement system	±0,5 g	10 V/g to 1000 V/g or 0,1 V/ips to 10 V/ips	0.05...100 Hz 0.05...450 Hz 0.8...150 Hz depending on filter	Low-pass filter	-10...+65°C (P31: 0...+50°C)	Vibration Sensor P31add to notepad
786-500 General purpose low frequency vibration sensor	±10 g	500 mV/g ±5 %	0.2...14000 Hz	250 µg	-50...+120°C	Vibration Sensor 786-500 add to notepad
793L Premium sensor	±10 g	500 mV/g ±5 %	0.2...2300 Hz	8.0 µg	-50...+120°C	Vibration Sensor793L add to notepad
797L Premium sensor	±10 g	500 mV/g ±5 %	0.2...3700 Hz	12 µg	-50...+120°C	Vibration Sensor797L add to notepad
797L-35 Premium sensor with ATEX approval	±10 g	500 mV/g ±5 %	0,2...3.700 Hz	12 µg	-50...+120°C	add to notepad
799LF Premium sensor	±10 g	500 mV/g ±5 %	0.1...2500 Hz	Low-pass filter	-50...+120°C	Vibration Sensor799LF add to notepad
799M Premium sensor with high sensitivity	±5 g	1000 mV/g ±5 %	0.2...2500 Hz	Low-pass filter	-50...+80°C	Vibration Sensor799M add to notepad
AV0823B Triaxial vibration sensor	±12 g	500 mV/g ±5 %	0.07...6000 Hz	<26 µg [0.5 ... 20 kHz]	-30...+90°C	Vibration SensorAV0823Badd to notepad

High-temperature Vibration Sensors

Model	Measurement Range	Sensitivity	Frequency Range	Noise [2,5Hz...25kHz]	Temp. Range	Datasheet
376 High temperature sensor with charge output	n.a.	25 pC/g	1...12000 Hz [±3 dB]	---	-50...+260°C	Vibration Sensor376 add to notepad
376/CC701HT High temperature sensor with downstream charge amplifier	±50 g	100 mV/g ±10 %	1...15000 Hz [±3 dB]	---	-50...+260°C (CC701HT: -40...+100°C)	Vibration Sensor376HTadd to notepad
793-6 High temperature sensor	±50 g	100 mV/g ±10 %	1...12000 Hz [±3 dB]	0.3 mg	-50...+150°C	Vibration Sensor793-6add to notepad
797-6 High temperature sensor with side connector	±50 g	100 mV/g ±10 %	1.0...11000 Hz [±3 dB]	0.3 mg	-50...+150°C	Vibration Sensor797-6add to notepad
AV3030B5H Miniature vibration sensor for high temperatures and integrated IEPE amplifier	±500 g	10 mV/g ±5 %	5...10000 Hz [±5 %]	0.007 g	-50...+163°C	add to notepad
AV3023AH Triaxial miniature vibration sensor for high temperatures	±500 g	10 mV/g -10/+15 %	1.5...10000 Hz [-5/+15 %]	0.0095 g	-50...+160°C	Vibration SensorAV3023add to notepad
AV3023M30 Triaxial miniature vibration sensor for high temperatures	±500 g	10 mV/g -10/+15 %	1.2...5000 Hz [-5/+15 %]	0.007 g	-50...+163°C	Vibration SensorAV3023add to notepad

Vibration Sensors for Special Applications

z. B. Unterwasser, Helikopter, PVT, Multifunktion

Model	Measurement Range	Sensitivity	Frequency Range	Noise [2,5Hz...25kHz]	Temp. Range	Datasheet
746 Underwater vibration sensor	±50 g	100 mV/g ±5 %	1...15000 Hz [±3 dB]	50 µg	-50...+80°C	Underwater Sensor 746add to notepad
754 Miniature underwater vibration sensor	±250 g	10 mV/g ±1.5 dB	2...25000 Hz [±3 dB]	300 µg	-20...+90°C	Underwater Sensor 754add to notepad
757 Dual axis underwater vibration sensor	±50 g	100 mV/g ±10 %	2...2000 Hz [±10 % each channel]/td>	100 µg	-50...+80°C	Underwater Sensor 757add to notepad
793T-3 General purpose sensor with internal temperature sensor	±80 g -50...+120°C	100 mV/g ±5 % 10 mV/K ±5 %	0.5...15000 Hz [±3 dB]	600 µg	-50...+120°C	Multi-function Sensor793T-3 add to notepad
797LT Low frequency sensor with temperature sensor	±10 g -50...+120°C	500 mV/g ±5 % 10 mV/K ±5 %	0.2...3700 Hz [±3 dB]	12 µg	-50...+120°C	Multi-function Sensor797LT add to notepad
797T-1 Sensor with side connector and temperature sensor	±80 g -50...+120°C	100 mV/g ±5 % 10 mV/K ±5 %	1...12000 Hz [±3 dB]	600 µg	-50...+120°C	Multi-function Sensor797T-1 add to notepad
793V \| 793V-35 PVT velocity transducer (793V-35 with ATEX approval)	±50 ips	100 mV/ips ±10 %	2.5...7000 Hz [±3 dB]	100 µips	-50...+120°C	Velocity Sensor793V add to notepad
793V-5 PVT velocity transducer	±10 ips	500 mV/ips ±10 %	5.0...7000 Hz [±3 dB]	40 µips	-50...+120°C	Velocity Sensor793V-5 add to notepad
797V PVT velocity transducer with side connector	±50 ips	100 mV/ips ±10 %	1.6...7000 Hz [±3 dB]	100 µips	-50...+120°C	Velocity Sensor797V add to notepad
991D Helicopter sensor	±40 g	40 mV/g ±5 %	0.5...12000 Hz [±3 dB]	75 µg	-50...+120°C	Helicopter Sensor991D add to notepad
991V Helicopter sensor for velocity measurement	±400 ips	20 mV/ips ±10 %	2.5...7000 Hz [±3 dB]	1500 µips	-50...+120°C	Helicopter Sensor991V add to notepad
992-1* Helicopter sensor with integral cable Linearity: ±1 % to 100 g ±1,5 % bis 300 g	±500 g (limit)	10 mV/g ±10 %	2...20000 Hz [±1.5 dB]	[2 Hz...25 kHz] <0.002 g	-35...+100°C	Helicopter Sensor 992-1 add to notepad
*Sensor is subject to ITAR regulations

Vibromatrix® Vibration Measuring Systems

Model	Features				Datasheet
InnoBeamer® USB data acquisition device for IEPE vibration sensors, easy to use system for PC-based vibration measurement and analysis					InnoBeamer Overview:VibroMatrix® add to notepad
	Frequency range	Supply	Interface	Housing
InnoBeamer® L2 InnoBeamer® X2	0.3 ... 2000 Hz 0.1 ... 40000 Hz	via USB	USB 2.0, compatible until Windows 7	in-line
InnoMeter® When vibrations are measured as significant parameters, the InnoMeters are applied.	The InnoMeters in Standard and in Pro Version are highly universal measuring instruments for vibration parameters. They can be adapted to parameters from numerous vibration standards. Measurands: acceleration, velocity, displacement				InnoMeter® add to notepad
InnoPlotter® When vibration parameters are measured and controlled for a longer time, the InnoPlotters are suitable	The InnoPlotters in Standard and in Pro Version are universal digital strip chart recorders for vibration parameters. The Pro Version includes two integrators and is consequently able to process not only vibration acceleration, but also vibration velocity and displacement.				InnoPlotter® add to notepad
InnoLogger® For the monitoring of vibration parameters and their logging for later analysis	Rotating parts in drives, gears, pumps, fans and many other technical products cause perturbing vibrations. Impulse-like loads, e.g. from a vibratory pile driver in the construction-field, generate problems as well.				InnoLogger® add to notepad
InnoScope® The InnoScopes allow the signals‘ shape analysis of fast vibration and shock processes in time domain. These processes are acquired and measured with high resolution and can be exported for documentation or postprocessing.	Another field of application is the determination of natural frequencies. The measurement object is stimulated impulse-like, the InnoScope triggers the event and displays the time course of the signal. A coupled InnoAnalyzer analyzes the triggered time signal and displays it in the frequency domain simultaneously. Natural frequencies can be read off at once.				InnoScope® add to notepad
InnoAnalyzer® For the frequency analysis of vibrations	Rotating parts in drives, gears, pumps, fans and many other technical products cause perturbing vibrations. Often numerous parts with different rotation speed cause mechanical vibrations so that a superposition of frequencies is generated.				InnoAnalyzer® add to notepad
InnoAnalyzer® Speed Different rotation speeds cause different vibrations since the measurement objects develop or do not develop resonant behaviour at certain rotation speeds.	These differences become obviously when measuring run-up or coast-down curves. A rotor changes its rotation speed and excites different frequencies of the system. The InnoAnalyzers Speed measure the vibration level at the rotation speed or a multiple and graphically indicate magnitude and phase at the respective rotation speed.				InnoAnalyzer® Speed add to notepad
InnoBalancer® The InnoBalancers are used for the reduction of vibrations.	The InnoBalancers allow a purposeful reduction of the vibration by balancing. Both discoidal and longish rotors can be balanced systematically and fast.				InnoBalancer add to notepad
InnoMeter® HVM 5349:2001 Human hand-arm vibration measurement acc. to EN ISO 5349:2001 and EC Directive 2002/44/EC	If hand held machines or workpieces transmit strong vibrations to the operator, a decreased performance and even diseases in blood vessels, nerves, bones, joints, muscles or the connective tissue might develop. For this reason, divers guidelines stipulate measurements acc. to EN ISO 5349, which determines the impact on the human hand-arm-system.				InnoMeter® HVM5349 add to notepad
InnoMeter® HVM 2631:1997 Human whole-body vibration measurement acc. to EN ISO2631:1997 and EC Directive 2002/44/EC	If strong vibrations are transmitted to human beings, a decreased performance and even diseases in blood vessels, nerves, bones, joints, muscles or connective tissue might develop. For this reason, divers guidelines stipulate measurements acc. to ISO2631, which assesses the vibration impact on human beings.				InnoMeter® HVM2631 add to notepad
InnoMeter® HVM 6954:2001 Vibration measurement on ships	On board passenger and merchant vessels vibrations can occur, which may negatively interfere with the work of the crew or which may diminish the comfort of passengers and crew. In order to assess complaints or to prevent them, measurements acc. to DIN ISO 6954:2001 are suitable, since they allow the evaluation of the vibration severity with regard to habitability on board ships.				InnoMeter® HVM6954 add to notepad
InnoMeter® 4150-3 The InnoMeter 4150-3 was developed for the measurement of vibrations on buildings acc. to the German standard DIN 4150-3.	Vibrations from heavy building activities, traffic, machine operation or also detonations affect existing building stock. The InnoMeter 4150-3 measures these vibrations, valuates acc. to the standard immediay and can inform about the vibrations occured at any time.				InnoMeter® 4150-3 add to notepad
InnoMeter® 3834 The InnoMeter 3834 was developed for the measurement of vibrations on wind energy systems acc. to German standard VDI 3834	This instrument allows the measurement and analysis of vibrations on both building constructions (like tower and generator house) and machinery components, like rotor, gear and generator.				add to notepad

Amplifiers for IEPE Sensors and IEPE Power Supply Systems

Model	Supply Voltage	Output	Configuration	Datasheet
VIB-2K-KA-15B-010 Dual channel amplifier for vibration sensors	±15 V regulated	±10 V peak-peak 0 ... 7.07 V rms	19''-rack	Amplifier VIB-2K add to notepad
VIB-5B-PEAK \| VIB-5B-EFF 5B-Amplifier for piezoelectrical accelerometers	5 VDC	±5 V peak-peak 0...3.535 V rms	5B Modul	Amplifier VIB-5B add to notepad
VIB-IP-24-1GW Amplifier for vibration sensors with limit switches	24 VDC ±5 %	1 Switching contact	IP Enclosure	Amplifier VIB-IP add to notepad
VIB-KS-24-010 Amplifier for vibration sensors	24 VDC ±5 %	±10 V peak-peak ±20 mA peak-peak 0 ... 7.07 V eff	for DIN rail	Amplifier VIB-KS add to notepad
VIB-KS-24-xGW Amplifier for vibration sensors with limit switches	24 VDC ±5 %	±10 V peak-peak 0 ... 7.07 V rms 1 or 2 Switching contacts	for DIN rail	Amplifier VIB-KS-24 add to notepad
P702B Amplifier for vibration sensors	Battery 3x 9 V or +27 VDC	max. 6.0 V peak (mV/g, mV/ips)	Desktop	Amplifier P702B add to notepad
P703B \| P704B Power supply system for vibration sensors	Battery 3 x 9 V	depending on sensor	hand-held	Amplifier P703B Amplifier P704B add to notepad
P703BT Power supply system for triaxial vibration sensors	Battery 3 x 9 V	depending on sensor	hand-held	Amplifier P703BT add to notepad
P31 Power supply system and low-noise amplifier	Battery 2x 9 V	max. 3.5 V rms (mV/g, mV/ips)	Desktop	Amplifier P31 add to notepad
PR710A \| PR710B 10-Channel power supply system and amplifier for vibration sensors	230 VAC	depending on sensor	19" rack	Amplifier PR710 add to notepad
CB2 \| CB4 Cable termination boxes	2 or 4 measuring channels, terminal block input, BNC output		NEMA 4x wall mounting enclusore	Cable Termination CB2add to notepad

Charge Amplifiers

Model	Supply Voltage	Output	Configuration	Datasheet
CC701 \| CC701A In-line charge converter	18 ... 30 VDC	1 mV/pC 10 mV/pC	in-line	Charge Amplifier CC701 Charge Amplifier CC701Aadd to notepad
CC701-HT In-Line charge converter for high temperatures	18 ... 30 VDC	4 mV/pC	in-line	Charge Amplifier CC701-HTadd to notepad

Portable Measuring Instruments

	Model	Supply Voltage	Output	Configuration	Datasheet
	PVM100 Digital vibration meter	6 V battery	Digital display AC Output: 10 mV/(m/s²), 10 mV/(mm/s), 1 V/mm	hand-held	Portable Meter PVM100add to notepad

IT - Inligent Transmitters* for Vibration Monitoring

	Model	Input	Output	Supply Voltage	Configuration	Datasheet
	iT100M \| iT200M Amplifier series for vibration sensors (metric units)	IEPE vibration sensors	4 ... 20 mA TBUS	24 ±4 VDC	35 mm DIN rail module	Vibration TransmitteriT100M add to notepad
	iT401 Alarm module for 4 ... 20 mA signals	TBUS or 4 ... 20 mA	3 alarm relay contacts @ 8A 4 ... 20 mA LED	24 VDC nom.	35 mm DIN rail module	Vibration TransmitteriT401 add to notepad
	iT501 Communication module	up to 8x 4 ... 20 mA	RS232	24 VDC nom.	35 mm DIN rail module	Vibration TransmitteriT501 add to notepad
* Please find more iT accessories in our Short Form Catalog Vibration or call.

Vibration Accessories and Shaker Systems*

	Description	Datasheet
	Cables	CatalogVibrationadd to notepad
	Mounting Accessories	CatalogVibrationadd to notepad
	Connectors	AccessoriesConnectorsadd to notepad
	Elektromagnetic and piezo-electric shakers

盤式制動器
剎車卡鉗
鼓式制動器
風暴剎車
聯軸器與光盤
與聯軸器鼓
發布單位
轉子和偏航制動器
起重機車輪

Disc brakes
Caliper brakes
Drum brakes
Storm brakes
Couplings with disc
Couplings with drum
Release units
Rotor- and yaw-brakes
Crane wheels

Disc Brakes type USB Service- or emegency stop brake for container cranes, belt conveyor, bucket wheel excavator	Compact- Disc Brakes Service brakes e.g. for travel drives or conveyors	Disc Brakes ABT, ABS & FSB Rotor- and Yaw Brakes for wind turbines
Twin Caliper Brakes type TEXU Service or emergency stop brake for container cranes, belt conveyor, bucket wheel excavator	Storm Brakes Static Storm brakes for rail mounted cranes to prevent runaway in a storm or power failure	Disc Brakes type SHD Stopping and holding brake e.g. for blowers and turbines
Disc Brakes type SHI Emergency back-up brake on rope drums and conveyor	Drum Brakes Versatile brakes for general Industrial applications, steel and material handling cranes and conveyors	Release UnitsHydraulic power packs, electro hydraulic thrusters, pneumatic and hydraulic cylinders
Brake Discs Couplings with brake discs, hubs with bolted discs	Brake Drums Couplings with brake drums, hubs with drums	Crane Wheels acc. to DIN, acc. customer drawing or acc. SIBRE construction proposal