德國Saltus Technology AG工具

德國ROLAND ELECTRONIC Gmb傳感器 控制器

德國Laserline GmbH 德國Laserline光纖，Laserline二極管，Laserline激光器

:王工
同號
      449147851
價注意事項：
       1.請發(fā)書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數(shù)量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

Optimize your conventional or standard laser process by using high efficiency diode lasers from Laserline.

Our diode lasers offer:

1. High electrical/optical efficiency of up to 45 percent
2. Low investment and maintenance costs
3. Outstanding reliability and robustness
4. Mobility and compactness
5. Easy integration in systems for production
6. Excellent beam quality
7. Low maintenance design
8. Ease of use and service
9. Highest performance and reliability due to innovative, active cooling
10. Inherent redundancy via stack management

When sheets and blanks are fed automatically into processing machines, it is necessary to prevent two or more sheets entering the equipment inadvertently. Otherwise the result could be damage of tools and dies, stamping presses, expensive repairs and loss of production. Double sheet detection systems are therefore a necessary part of automated sheet metal processing. This applies to highly automated production facilities in the automotive industry just as much as to the mass production of food and beverage cans. Roland double sheet detection systems have proved reliable in many thousand installations worldwide.

Single SidedFor single-sided double sheet control are different systems available: the low cost system with sensors based on permanent magnets, the system with electromagnets for steel only and a system with a combination sensor for ferrous and non-ferrous materials. New: Our innovative eddy current sensor for the detection of layers, butt joints and edges in semi-finished products.
 >> more

A100Single-sided double sheet control for ferrous material from 0.04 to 4.00 mm -- mainly, however, for tinplate and similar materials in the metal packaging industry because of the force exerted by the permanent magnets. >> more

E20Double sheet detection in destackers, robot loaders, press feeder. Single-sided air gap tolerant sensors for double sheet control ranging from 0.1 to 12 mm single sheet thickness.  >> more

Eagle Eye AAInnovative eddy current sensor for the detection of layers, butt joints and edges in semi-finished products. Double sheet detection from 0.2 to 8 mm (0.008 to 0.315 in), depending on sensor and material.  >> more

I100-S-WINoncontact single probe measurement for tinplate, aluminum and non-magnetic stainless steel. Tinplate 0.15 to 0.50 mm sheet thickness , aluminum 0.05 to 0.40mm and non-magnetic steel 0.5 to 3.00 mm. >> more

UDK20Single-sided double sheet control for sheet sheet thickness up to 4 mm of steel and nonferrous materials. Used heavily in the automotive industry and their parts suppliers for processing steel and e.g. aluminum. >> more

Dual head systemsThe noncontact double sheet detector system I20 is based on the transmission principle with transmitter and receiver and is especially well suited for pass-through double sheet detection. 
 >> more

C100Noncontact dual head double sheet detection / thickness gauging of metals from 0.2 to 16 mm. >> more

I100Noncontact dual head double sheet detection systems for ferrous and nonferrous materials. Steel .05 to 4.00 mm sheet thickness and nonferrous materials .05 to 12.00 mm. However, most applications are in the metal packaging industry with thicknesses at the lower end. >> more

I20Noncontact dual head double sheet detection for ferrous and nonferrous materials; three exchangeable pairs of sensors for steel from .01 to 8.00 mm and nonferrous materials from .01 to 15.00 mm depending on type of material.
 >> more

L20Dual head Double Sheet Control System for Metals and non metal material. Laser based function principle; Thickness Control from 0.3 to 15 mm (.012 to .590 in)
 >> more

Sensor bracketsRoland sensor brackets cover the full range of Double Sheet Control Applications, and were developed regarding the various requirements. The safety of Double Sheet Control depends strongly on the usage of the correct sensor bracket.
 >> more

SHX42Spring loaded sensor bracket with flat suction cup and lateral clearance. Highest tilt flexibility, highest spring travel. Rigid during approach. For high lateral acceleration (up to 2g), minimal wear.
 >> more

SHS42G-FB80Spring loaded sensor bracket with bellow suction cup, for utmost sensor contact on inclined or ondulated sheet stacks and narrow sheets.
 >> more

SHS42G-FBSpring loaded sensor bracket with bellow suction cup, for utmost sensor contact on inclined or ondulated sheet stacks.
 >> more

SHS42GSSpring loaded sensor bracket with flat suction cup, strong hold on even sheets due to suction cup. 
 >> more

SH42GSSpring loaded sensor bracket, for narrow sheets and applications where weight is critical.
 >> more