進口氣動一片式內螺紋球閥

德國進口氣動一片式內螺紋球閥產品特點：

 ①流體阻力小，其阻力系數與同長度的管段相等；
 ②結構簡單、體積小、重量輕；
 ③緊密可靠，現球閥的密封面材料廣泛使用塑料、密封性好，在真空系統中也已廣泛使用；
 ④操作方便，開閉迅速，從全開到全關只要旋轉90°，便于遠距離的控制；
 ⑤維修方便，球閥結構簡單，密封圈一般都是活動的，拆卸更換都比較方便。

Germany imported pneumatic internal thread ball valve product features:

Of fluid resistance small, the drag coefficient and the length of the pipe with the same;

The has the advantages of simple structure, small volume, light weight;

The close and reliable valve sealing surface material is widely used in plastic, good sealing in the vacuum system has also been widely used;

, easy operation, open and close rapidly, from fully open to fully closed as long as 90 degree rotation, facilitate remote control;

The ball valve has the advantages of simple structure, convenient maintenance, seals are generally activities, removal of the replacement is more convenient.

技術參數：

規格范圍：1/4”~4”; 溫度范圍：-20～250℃; 壓力范圍：2.5MPa~50MPa;

主要材質：A105/SS304/SS316; 螺紋類型：BS、G、RC、NPT

適用范圍：水、油品、蒸汽、氣體 氣執行器主要參數

工作介質: 壓縮空氣、氮?dú)?/span> 工作壓力: 0.4-0.8MPa 驅動軸轉角:90°±9°

進口一片式內螺紋球閥產品概述：

進口一片式內螺紋球閥是由雙（單）作用氣動活塞式執行器和內螺紋（對焊式）球閥組成。其閥體可分為整體式、二段式、三段式。閥座采用彈性密封結構，密封可靠，啟閉輕松。閥桿采用有倒密封的下裝式結構，閥腔異常升壓時，閥桿不會被沖擊。氣動活塞式執行器采用低摩擦材料做成軸承套，缸體內外表面經硬質陽極氧化防腐處理，大大提高了氣缸的使用壽命。本產品使用性能穩定，廣泛的用于石化、冶金、電力、輕工、醫藥等工業部門。

Import a piece of internal thread ball valve product overview:

Imported within a thread ball valve is composed of double (single) acting pneumatic piston actuator and internal thread (welded ball valve). The valve body can be divided into integral type, two section type, and the three section type. Seat with elastic sealing structure, reliable sealing, easy to open and close. The stem seal downloading inverted structure, abnormal pressure of the valve chamber, valve stem will not be hit. The pneumatic piston actuator is made of low friction material, and the inner and outer surfaces of the cylinder body are treated by hard anodic oxidation, which greatly improves the service life of the cylinder. This product is stable, widely used in petrochemical, metallurgy, electric power, light industry, medicine and other industrial sectors.

進口一片式內螺紋球閥工作原理：

當氣動執行器與電路和系統氣源接通后，空氣通過管道A或B管進入A缸（B缸）推動活塞向一端運動，從而帶動旋轉軸和球芯轉動90°，氣動執行器頂部連動可視器，當綠色標志指向開字時標志閥門開啟。回信器信號燈綠燈亮?xí)r氣動閥門處在開啟位置，而紅燈亮?xí)r氣動閥門處在關閉位置。定位器可調節閥門管道流量。

Import a piece of internal thread ball valve working principle:

When the pneumatic actuator is connected with the circuit and system of gas supply, air enters the cylinder through the A pipeline A or B tube (B cylinder) to push the piston to the end of movement, so as to drive the rotary shaft and the ball core is rotated 90 degrees, pneumatic actuator linkage device when the top visible, green signs point the word mark to open the valve open. A reply signal lamp lights the pneumatic valve is in the open position, the valve is in the closed position and the red light of aerodynamics. Positioner can adjust the valve pipe flow.