ActiveCount100微生物采樣器，廣泛適用于無塵室和無菌環境。它利用 Andersen 空氣采樣器的原理，抽取空氣通過多孔蓋 （300*0.6mm），氣流中的微生物則撞擊附著在標準培養皿中瓊脂培養基的表面。完成采樣周期之后，將該培養皿放到適宜條件下培養，然后確定菌落總數。按照標準，制藥行業用以計量的標準是 1 立方米內微生物總量。

ActiveCount100微生物采樣器行業

制藥、醫院、食品和飲料

無塵室、生物安全柜,光電隔離器

室內空氣品質室內空氣質量、博物館、圖書館

化妝品、紡織、農業、環境

額外的無菌環境監測應用

特性

3.5英寸(8.9厘米)彩色觸摸屏

直觀的用戶界面

8個可編程采樣量

50個可編程的用戶名

400可編程位置名稱

流量報警

數據記錄到USB閃存驅動器

浮游菌撞擊采樣頭

AC /電池正常使用6小時,2小時充電時間

連續的,周期性和氣體采樣模式

適用于無菌條件下

直接濕抹布擦拭

可選的壓縮氣體取樣器

參數

ActiveCount100 is a high performance portable microbial sampler suitable for use in cleanrooms and asceptic environ-ments.

Continuous and periodic sampling enables complete control on sampling cycles and intervals. Autoclavable impactor head and sanitizable stainless steel enclosure ensure ActiveCount100 does not contaminate your sampling environment. Use the optional gas sampler to monitor compressed gasses.

I N D U S T R I E S

Pharmaceutical, Hospital, Food & Beverage

Cleanrooms, Biological Safety Cabinets, Isolators

IAQ Indoor Air Quality, Museums, Libraries

Cosmetics, Textiles, Agricultural, Environment

Additonal Aseptic Environment Monitoring Applications

F E A T U R E S

3.5 inch (8.9 cm) color touch screen

Intuitive user interface

8 programmable sampling volumes

50 programmable user names

400 programmable location names Flow rate alarming

Data logging to USB flash drive Autoclavable sampling head

AC/Battery 6 hrs normal use, 2 hrs charge time Continuous, Periodic and Gas sampling modes Suitable for sterile conditions

Wipedownable

Optional compressed gas sampler

Included in the box.

1x ActiveCount100 .                                                

1x Dust cover.

1x Sample head.

1x Petri dish adjustment tool.

1x USB 8 GB flash drive with cap.

1x 4-20 threaded tripod adapter.

1x 24 VDC power adapter with chord.

1x Operators manual on USB flash drive.

1x Calibration certificate.

1x Carry case.

Connection to power.

1. Plug in USB flash drive.
2. Connect AC Power Adapter to ActiveCount100.
3. Connect power chord to AC power.
4. Connect power chord to power adapter.
5. Charge battery to *.

 How to setup your first microbiological sample.

 From home screen press configuration.

 Load the petri dish with agar.

Unscrew sample head together with the dust cover.

 -always keep dust cover on sample head when not in use.

Add sample petri dish.

Use adjustment tool to secure petri dish at 3 points.

Screw sampling head together with dust cover. back onto ActiveCount100.

Start the sample.

From the home screen confirm your sample parameters for volume, total countdown time, user and location.

Press start to begin the sample.

When the sample is complete.

Replace the dust cover on the sample head.

Unscrew sample head together with the dust cover and always keep dust cover on sample head when ActiveCount100 is not in use.

Cover the sampled petri dish and remove from ActiveCount100. Use adjustment tool if needed to loosen petri dish from 3 points.

Screw sampling head with the dust cover back onto ActiveCount100.