特點   Featrures

◎  本機采用臥式圓筒構造，結構合理。 

◎  充氣密封驅動軸，清洗時可切換成水。

◎  流態化造粒，成粒近似球形，流動性好。

◎  較傳統工藝減少25%粘合劑，干燥時間縮短。

◎  每批次干混2分鐘，造粒1-4分鐘，工效比傳統工藝提高4-5倍。

◎  在同一封閉容器內完成，干混-濕混-制粒，工藝縮減，符合GMP規范。

◎  整個操作具有嚴格的安全保護措施。

◎   The machine adapts a practical horizontal cylinder structure.

◎   The driving shaft is equipped with inflatable seal. While washing, the air can be replaced by water.

◎   Fluidized granulating processed is used and the final granules are quite round with high fluidity.

◎  Compared with traditional technique, this type of machine can reduce 25% of adhesive and also shorten the drying time.

◎   For each batch of material, with 2 minutes' dry mixing and 1-4 minutes' granulating, the efficiency is 4-5 times higher than that of traditional technique.

◎  Dry mixing, wet mixing and granulating are finished inside the same sealed container, which is in conformity with the requirements of "GMP" .

◎  The whole operation has strict safe and protective measures.

----------------------------------------------------------------------------------------------------------------

工藝流程   Technological proccess

----------------------------------------------------------------------------------------------------------------

技術參數   Technical parameters